Please call support
+8617736162821
DIN929 welded hex nuts are mainly used in scenarios that require high-strength connections and special shaped connections. This type of nut is connected to the connector by welding and is suitable for situations where conventional bolt connections cannot be made, such as when the connector is too thin or irregularly shaped. The welding process is equivalent to turning two separate parts into a whole, melting the metal at high temperature, mixing it together, and then cooling it. An alloy is added in the middle, relying on molecular force, and its strength is generally greater than that of the parent material.
| Product Name | DIN929 Hexagon Weld Nuts |
| Material | Carbon steel, Stainless steel |
| Surface Finish | Original color, Decolourize |
| Colour | White |
| Standard Number | DIN929 |
| Grade | 4 6 A2-70 |
| Diameter | M4 M5 M6 M8 M10 M12 M14 M16 |
| Thread form | Coarse thread |
| Place of origin | Hebei, China |
| Brand | Muyi |
| Pack | Box+cardboard carton+pallet |
| The product can be customized | |
| DIN929 welded hex nuts are mainly used in scenarios that require high-strength connections and special shaped connections. This type of nut is connected to the connector by welding and is suitable for situations where conventional bolt connections cannot be made, such as when the connector is too thin or irregularly shaped. The welding process is equivalent to turning two separate parts into a whole, melting the metal at high temperature, mixing it together, and then cooling it. An alloy is added in the middle, relying on molecular force, and its strength is generally greater than that of the parent material. | |
| Thread Spec D |
M3 | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | ||
| P | Flight lead | Coarse thread | 0.5 | 0.7 | 0.8 | 1 | 1.25 | / | 1.75 | 2 | 2 |
| Fine thread1 | / | / | / | / | 1 | / | 1.25 | 1.5 | 1.5 | ||
| Fine thread2 | / | / | / | / | / | * | 1.5 | / | / | ||
| b | nominal | 0.8 | 0.8 | 0.8 | 0.9 | 1 | 1.25 | 1.25 | 1.5 | 1.5 | |
| max | 1 | 1 | 1 | 1.12 | 1.25 | 1.55 | 1.55 | 1.9 | 1.9 | ||
| min | 0.6 | 0.6 | 0.6 | 0.68 | 0.75 | 0.95 | 0.95 | 1.1 | 1.1 | ||
| d1 | nominal | 4.5 | 6 | 7 | 8 | 10.5 | 13.5 | 14.8 | 16.8 | 18.8 | |
| max | 4.47 | 5.97 | 6.96 | 7.96 | 10.45 | 13.45 | 14.75 | 16.75 | 18.735 | ||
| min | 4.395 | 5.895 | 6.87 | 7.87 | 10.34 | 13.34 | 14.64 | 16.64 | 18.605 | ||
| d2 | min=nominal | 4.5 | 6 | 7 | 8 | 10.5 | 13.5 | 14.8 | 16.8 | 18.8 | |
| max | 4.68 | 6.18 | 7.22 | 8.22 | 10.77 | 13.77 | 15.07 | 17.07 | 19.13 | ||
| d3 | max | 3.15 | 4.2 | 5.25 | 6.3 | 8.4 | 11.7 | 12.6 | 14.7 | 16.8 | |
| e | min | 8.15 | 9.83 | 10.95 | 12.02 | 15.38 | 20.91 | 20.91 | 24.27 | 26.51 | |
| h1 | max | 0.55 | 0.65 | 0.7 | 0.75 | 0.9 | 1.4 | 1.4 | 1.8 | 1.8 | |
| min | 0.45 | 0.55 | 0.6 | 0.6 | 0.75 | 1.2 | 1.2 | 1.6 | 1.6 | ||
| h2 | max | 0.25 | 0.35 | 0.4 | 0.4 | 0.5 | 0.8 | 0.8 | 1 | 1 | |
| min | 0.15 | 0.25 | 0.3 | 0.3 | 0.35 | 0.6 | 0.6 | 0.8 | 0.8 | ||
| m | max=nominal | 3 | 3.5 | 4 | 5 | 6.5 | 10 | 10 | 11 | 13 | |
| min | 2.75 | 3.2 | 3.7 | 4.7 | 6.14 | 9.64 | 9.64 | 10.57 | 12.57 | ||
| s | max=nominal | 7.5 | 9 | 10 | 11 | 14 | 19 | 19 | 22 | 24 | |
| min | 7.28 | 8.78 | 9.78 | 10.73 | 13.73 | 18.67 | 18.67 | 21.67 | 23.67 | ||
| 1000 pcs/weight kg |
0.78 | 1.13 | 1.73 | 2.5 | 5.27 | 14 | 13.7 | 21.3 | 28.5 | ||
1. How to use: ① Drill a hole equal to the diameter of the anchor to the smallest size. ② Clear the hole and insert the anchor into the hole with a hammer ③ Tighten the nut to expand the anchor to fix the object 2. Application: ① Can be used for concrete, blocks, bricks, stones, steel structures, machines, doors, stairs, floors ② Can be used to repair the load of exterior walls or windows
1.Installation steps: ① Punch a hole ② Hammer the casing into the air ③ Screw the screw into the wall anchor ④ Installation is complete 2.Scope of application: Suitable for home decoration, industrial building materials, medical equipment, etc. 3.Product features: small and light, easy to carry, easy to take, strong and durable
Hollow wall anchor bolts, also known as hollow wall anchors or hollow expansion screws, are mainly used in hollow walls, gypsum boards, fiberboards, plastic boards, wooden boards and other walls. They are light load anchor bolts. The heads and nuts at both ends are of two types: “welded” and “integrated”. They can be directly installed with an electric screwdriver or pulled with special tools. Installation method: 1. The teeth on the head of the casing can be embedded in the hollow substrate, which can effectively prevent the casing from rotating in the hole during installation. 2. After installation, the expansion arm is opened behind the hollow substrate to form a large radius and large area of contact, providing a reliable anchoring effect. 3. The matching screws can be easily removed, and the mounting parts can be repeatedly disassembled and assembled without affecting the anchoring effect. 4. Ordinary flat-blade or cross screwdrivers can be used for installation. If special installation tools are used, it can be more suitable for large-scale professional use occasions.
1. How to use: When using, you must first use an impact drill (hammer) to drill a hole of the corresponding size on the fixed body, then install the bolt and expansion tube into the hole, and tighten the nut to expand the bolt, expansion tube, mounting part and fixed body into one. After tightening, it will expand. There is a big head at the end of the bolt, and a round tube slightly larger than the bolt diameter is placed outside the bolt. There are several openings at the end. When the bolt is tightened, the tail of the big head is brought into the open tube, expanding the tube to achieve the purpose of expansion, and then fix the bolt to the ground. 2. Principle of use: The principle of expansion bolts is to drive the expansion bolts into the holes on the ground or wall, and then tighten the nuts on the expansion bolts with a wrench. The bolts move outward, but the metal sleeves outside do not move. Therefore, the big head under the bolts expands the metal sleeves to fill the entire hole. At this time, the expansion bolts cannot be pulled out. (However, its fixation is not very reliable. If there is a large vibration under the load, it may loosen. Therefore, it is not recommended to install ceiling fans and other items with large shaking amplitudes.)
1. TAM Anchor is a special threaded connector, mainly used to fasten parts that need to withstand large tensile forces, such as bridges, buildings, etc. 2. Application:Tam anchors are widely used in many industries. In the auto maintenance industry, they are often used to fix and install lifts. In the construction industry, tam anchors can be used to fix various building accessories. In the hardware manufacturing industry, it can be used with other types of expansion bolts to fix various building components. Tam anchors can also be used in other occasions where pipes or equipment need to be fixed.
1.The serrated lock washer is a single ring washer, open type dislocation, when the wrench tighten the nut, the wrong opening of the tooth above the serration will be inlaid to the surface of the member, to prevent the nut from loosening. 2. The lock washer is mainly used with the nut and installed on the bolt, which is a bit like the role of the spring washer. The Serrated Lock Washers is generally used under the bolt head and nut.
1. The slotted structure of the slotted nut allows the nut to easily slide into the bolt or threaded rod without fully rotating. This design feature makes it easier to tighten in small or hard-to-reach Spaces and improves installation efficiency. 2. Slotted nuts have a wide range of applications, covering construction, machinery, electronics and other fields. In building structures, slotted nuts are often used to connect structural elements such as beams and columns. In mechanical assembly, it can be used to fix parts to ensure the normal operation of the machine; In the field of electronics, slotted nuts can be used to mount circuit boards and various devices.
GB854 Tab Washers With Long Tab is mainly used to prevent bolts or nuts from loosening in vibration environments, ensuring the stability of the connection.
GB62.2 Butterfly Nut (Square Wing Butterfly Nut) is mainly used in occasions that require frequent disassembly and installation, especially suitable for furniture, mechanical equipment, and automotive fields. Its design features include flat square wings on both sides, allowing the nut to be easily rotated by fingers without the need for tools, thereby improving the convenience and efficiency of operation.
DIN582 lifting ring nuts are mainly used to connect chains and steel wire ropes, and can also be used for lightweight lifting. The hanging ring nut refers to a component that is screwed together with a bolt or screw to provide a fastening effect, and is a necessary component for all production and manufacturing machinery.
Product Name DIN6923 Hex Flange Nut Material Carbon steel Surface Finish Yellow zinc Colour...
Drop in anchors are mainly used for situations where the embedded depth is shallow, by tightening the nut to expand the expansion tube and achieve fastening. This type of screw is suitable for concrete substrates, easy to install, and has high bearing capacity.
Product Name DIN6923 Equipped with anti slip teeth Hex Flange Nut Material Carbon steel, S...
1. The automobile industry Because of their applicability in metal applications, hexagonal head screws are often used in the automotive machinery industry for fixing and connecting components. Hexagon head screws add a strong and reliable connection to a variety of automotive and mechanical parts, and their installation process is relatively simple, providing convenience for many workers. 2. Furniture and cabinets Furniture production is a key area that pays attention to the capability and durability of hexagonal head screws. Hexagonal head screws ensure the robustness of the connection and the desired effect in the long term. Standard hexagonal head parts are the perfect choice for furniture and cabinets, ensuring a rugged, high-quality connection.”
1.DIN912 hex socket screw, also known as hex socket cylindrical head screw, is a common fastener, widely used in various mechanical equipment and electronic products. The DIN912 hex screw features a cylindrical head with a hexagonal hole at the top that requires the use of an hex wrench to tighten or loosen. This design allows the screw to provide greater torque during installation, while also preventing the screw from loosening during use. 2. Widely used : common in mechanical equipment, automobile manufacturing and other fields, used to connect parts and provide a stable fixed effect
The significant feature of the flange bolt with anti slip teeth is that its bottom is designed with serrated protrusions, which greatly enhances the fit between the bolt and nut, effectively avoiding loosening problems caused by vibration or prolonged operation. This feature makes toothed flange bolts an ideal choice for high load and high vibration situations, such as heavy machinery equipment, automotive power systems, and fine electronic equipment. In these applications, the stability and reliability of the connecting components are key factors in ensuring the quiet operation of the equipment, and the excellent anti loosening performance of the flange bolts with anti slip teeth has won widespread recognition and application.
Please enter your email address and we will reply to your email.
